 |
MicroGroup employs a broad range of CNC tip grinding machines and techniques to produce highly precise tips for needles and other pointed parts, from trocars and lancet to bevel and custom designs.
Trocars:
|
A Trocar point is a 3-sided grind on a solid wire, with grinds generally oriented 120° degrees from one other. |
|
Lancet:
|
The most popular needlepoint found in virtually every doctor's office, Lancets consist of two-side grinds on a triple ground needle. |
Bevel:
|
A Bevel is considered any ground surface of a cannula. There are many styles including A-bevel, B-bevel, C-bevel, Bias, |
| Chiba, Crawford, Deflected Tip, Francine, Hustead, Huber, Trocar, Tuohey, and many others. Below is an example of a Huber needle. |
|
 |
|
|
|
Non Standard Needle tips: |
 |
 |
|
Non-Standard Needle tips: While conventional needle grinding houses are typically limited to the standard needle tips listed above, MicroGroup can readily prototype and grind custom tips in small or large volumes. |
|
|
|
